Product title
$19.99 | $24.99
Product title
$19.99 | $24.99
Product title
$19.99 | $24.99
Product title
$19.99 | $24.99
TurtleClean Deluxe Turtle Filter for Aquatic Turtles
Product Description
The TurtleClean Deluxe Turtle Filter by Zoo Med is a highly efficient, low-wattage filter that provides sufficient filtration for turtle tanks. Choose the TurtleClean 10 for up to 10 gallons of water or the TurtleClean 20 for up to 20 gallons. Mount it vertically in a corner or horizontally for shallow tanks and clean cartridges through the easy-open door without removing the filter.
Benefits
- Low Wattage Design: A highly efficient filter that uses only 3.5 watts (TurtleClean 10) or 7.5 watts (TurtleClean 20).
- Sized for Turtle Tanks: Provides sufficient filtration for turtle tanks with up to 10 or 20 gallons of water.
- Steady Flow Rate: Filters up to 40 gallons per hour with the TurtleClean 10 and 60 gallons per hour with the TurtleClean 20.
- Flexible Mounting: Mount it vertically in a corner or horizontally for shallow tanks to suit your turtle's setup.
- Easy Open Door: Clean filter cartridges through the easy-open trap door without removing the main filter from the water.
- Adjustable Flow: Turn the round knob on the outlet tube to adjust the water flow to your tank's preferred level.
- Optional Aeration Attachments: Included optional attachments can replace the spray bar to aid aeration when the filter is mounted vertically.
Variants
- TurtleClean 10, up to 10 gallons
- TurtleClean 20, up to 20 gallons
Specifications
| Specification | Details |
|---|---|
| TurtleClean 10 (TC-22) | Up to 10 gallons; filters up to 40 gallons per hour; 3.5 watts |
| TurtleClean 20 (TC-23) | Up to 20 gallons; filters up to 60 gallons per hour; 7.5 watts |
| Mounting | Vertical in a corner or horizontal for shallow tanks |
| Filter media | 3-piece filter cartridge |
| Included parts | Spray bar, elbow connector, straight connector, venturi inlet joint, venturi valve and tubing |
| Access | Intake cover with easy-open trap door |
| Warranty | 1 year |
How to Use
Recommended-Usage Chart
| Detail | Information |
|---|---|
| Placement | Fully submerged, in a spot with adequate water circulation |
| Initial setup | Outflow valve at highest setting to purge air |
| Cartridge change | At least every 3 weeks, or sooner |
| Power | Drip loop on the cord; indoor use only |
| Horizontal use | Fit the elbow attachment to the spray bar first |
Disclaimer: Product information and usage guidelines are provided by the manufacturer. Always use products as directed and speak with your veterinarian if you have questions or concerns about your pet's health.
Usage Instructions
- Check the Parts: Remove everything from the box and check against the parts diagram to make sure nothing is missing.
- Attach the Spray Bar: Connect the spray bar to the outflow arm, adding the elbow first if mounting the filter horizontally.
- Clean the Glass: Clean the glass surface thoroughly of algae or water deposits where the filter will be placed.
- Position the Filter: Press the filter firmly into place in a spot with adequate circulation, ensuring it is fully submerged.
- Purge the Air: When setting up the filter, turn the outflow valve to its maximum setting to release trapped air.
- Adjust the Flow: Once no air comes out of the spray bar, turn the valve toward min or max as needed.
- Replace the Cartridge: Unplug the filter, open the trap door, and replace the fouled cartridge at least every 3 weeks.
Additional Information
Precautions
- Electric Shock Hazard: Water is used with this equipment; never attempt repairs yourself; return it for service or discard it.
- Check Before Plugging In: Do not plug in the filter if there is water on parts not intended to be wet.
- Use a Drip Loop: Arrange a drip loop in the cord so water cannot travel along it into the receptacle.
- If the Plug Gets Wet: Don't unplug a wet plug; disconnect the fuse or circuit breaker first, then unplug and inspect.
- Unplug Before Handling: Unplug the filter when not in use, before putting on or taking off parts, and before cleaning.
- Avoid Moving Parts: Do not contact moving or hot parts, and supervise closely when the filter is used near children.
- Intended Use Only: For indoor aquarium or vivarium use only; avoid attachments not recommended or sold by the manufacturer.
- Secure Installation: Make sure the filter is securely installed before operating it, and never yank the cord to unplug.
Storage Information
- Avoid Freezing: Do not install or store the filter where it will be exposed to weather or freezing temperatures.
- Clean and Dry: Unplug, empty, and dry the filter and its parts before storing them in a cool, dry place.
Shipping & Return
We offer ground, express, priority, and international delivery; see our shipping policy for details.
For return instructions or product concerns, please refer to our detailed refund policy.
Frequently Asked Questions
Q1: Which TurtleClean size do I need?
Ans: Choose the TurtleClean 10 (TC-22) for turtle tanks holding up to 10 gallons of water, or the TurtleClean 20 (TC-23) for tanks with up to 20 gallons—the 10 filters up to 40 gallons per hour, and the 20 filters up to 60.
Q2: How much power does the filter use?
Ans: The TurtleClean is a highly efficient, low-wattage filter. The TurtleClean 10 uses only 3.5 watts, and the TurtleClean 20 uses only 7.5 watts, according to Zoo Med's instructions for each size. Both provide sufficient filtration for turtle tanks within their rated capacity.
Q3: How often should I replace the cartridge?
Ans: Zoo Med recommends replacing the cartridge at least every 3 weeks, or sooner, to maintain proper water clarity. Change it whenever the flow rate decreases or water clarity declines. Unplug the filter open the trap door, and replace the fouled cartridge.
Q4: Do I have to take the filter out to clean it?
Ans: No. The door allows cartridge cleaning while the main filter stays connected to the water line. Unplug the filter first, open the trap door replace the cartridge with a clean unit, then close the door and plug it back in.
Q5: How do I adjust the water flow?
Ans: Turn the round knob to adjust the water flow. When setting up the unit for the first time, open the outflow valve fully to release trapped air Once air stops coming through the spray bar, move the valve toward the minimum or maximum setting as needed.
Q6: What are the optional attachments for?
Ans: Zoo Med includes optional attachments that can be used instead of the spray bar to aid aeration for your turtle when the filter is mounted vertically. You may connect them during setup if preferred, as shown in Zoo Med's instruction sheet.