Zoo Med ReptiTemp Digital Thermostat For Reptile Terrarium

ReptiTemp Programmable Digital Thermostat for Reptile Terrariums

Product Description

Zoo Med ReptiTemp Digital Thermostat controls your reptile terrarium's temperature by switching heating devices on in Heat mode or cooling devices on in Cool mode. It covers a 50 to 122 degrees Fahrenheit range, uses a remote sensor on a 6-foot cable, and handles up to 600 watts of heating or 150 watts of cooling devices. A built-in alarm and settings memory are included.

Benefits

• Heat and Cool Modes: Switches heating devices on in Heat mode or cooling devices, such as fans, on in Cool mode.
• Wide Control Range: Controls temperature from 50 to 122 degrees Fahrenheit (10 to 50 degrees Celsius),
• Remote Sensor: A remote temperature sensor on a 6-foot (185-centimeter) cable reads conditions inside the terrarium.
• High Wattage Capacity: Handles up to 600 watts of heating devices or up to 150 watts of cooling devices.
• Easy Programming: An LCD and two-button programming make it simple to set your target temperature with MODE and SET.
• Settings Memory: Built-in memory stores your settings in case of a power failure, so you will not need to reprogram.
• Temperature Alarm: An optional alarm flashes and beeps when the temperature moves outside your programmed range by a set amount.

Specifications

How to Use

Recommended-Usage Chart

Disclaimer: Product information and usage guidelines are provided by the manufacturer. Always use products as directed and speak with your veterinarian if you have any questions regarding your pet’s overall health.

Usage Instructions

• Set Up the Terrarium: Make sure the terrarium is fully set up and that the heating or cooling device is in place.
• Install the Sensor: Before plugging anything in, attach the remote sensor to the terrarium using the provided suction cup.
• Mount the Control Unit: Place the control unit outside the terrarium, secured with the included hook-and-loop strips or on a flat surface.
• Plug in the Thermostat: Plug the thermostat into a 120-volt grounded outlet; the display lights up briefly, then shows the default settings.
• Choose Fahrenheit or Celsius: Press and release the MODE button to select your preferred temperature scale on the display.
• Set the Temperature: Press SET until PROGRAM flashes, then press or hold SET to raise the target temperature.
• Select Heat or Cool: Hold MODE until HEAT or COOL flashes, then press SET to switch between modes as needed.
• Plug In Your Device: Plug your heating or cooling device into the socket on the front of the control unit.
• Program the Alarm (Optional): Hold MODE, then press MODE until ALARM flashes, and use SET to choose the trigger in degrees.

Additional Information

Precautions

• Wattage Limits: Do not use this device to control heaters exceeding 600 watts or cooling appliances exceeding 150 watts.
• Incompatible Devices: Do not use it to control mercury vapor UVB lamps, compact fluorescent lamps, or rock heaters.
• Grounded Outlet Only: Use only with a 120-volt, 60-hertz grounded outlet, and never use a two-prong adapter.
• Keep Components Dry: Do not immerse any thermostat component in water; keep the control unit outside the cage or terrarium.
• Protect Cords: Never stretch wires, rest heavy objects on cords, or operate with a damaged cord or plug.
• Do Not Open the Unit: There are no serviceable parts inside; opening the housing voids the warranty.
• Sensor Placement: Keep the sensor away from the heating or cooling device and out of your animal's reach.
• Indoor Use Only: This thermostat is for indoor use only and should not be used outside under any conditions.

Storage Information

• Unplug Before Storing: Unplug the heating or cooling device and the thermostat before storing or moving the unit.
• Store Indoors: Wrap the sensor cable loosely and keep the thermostat in a cool dry place indoors when not in use.

Shipping & Return

We offer ground, express, priority, and international delivery; see our shipping policy for details.

For return instructions or product concerns, please refer to our detailed refund policy.

Frequently Asked Questions

Q1: How does a reptile thermostat control terrarium temperature?

Ans: In Heat mode, the ReptiTemp Digital Thermostat turns your heating device on when the temperature drops below your setting and off once it reaches your setting. In Cool mode, it turns a cooling device, such as a fan, on when temperatures rise above your setting.

Q2: Can I use this thermostat with a heat lamp or ceramic heat emitter?

Ans: Yes. Zoo Med lists heat lamps, under-tank heaters, and ceramic heat emitters as heating devices that the thermostat can control in Heat mode. Just keep the total load at or below 600 watts, and make sure the device can reach your target temperature.

Q3: Which devices should not be used with this thermostat?

Ans: Zoo Med says not to use it to control mercury vapor UVB lamps, compact fluorescent lamps, or rock heaters. For a rock heater, Zoo Med recommends using its rheostat instead. Never connect heaters over 600 watts or cooling devices over 150 watts.

Q4: Where should I put the thermostat probe?

Ans: The probe can go in the substrate, wrap around furniture or branches, or be taped to the side of the tank. Avoid placing it too close to the heating or cooling device, and ensure your animal cannot chew on or tangle the cable.

Q5: Why isn't my terrarium reaching the temperature I set?

Ans: Zoo Med notes that your heating device must be able to reach the target temperature for the terrarium. If it cannot, you may need a heating device with higher wattage. Also check that the sensor is not placed too close to the heat source.

Q6: Will my settings be lost if the power goes out?

Ans: No. The thermostat's built-in memory stores your programmed settings in case of a power failure or if the unit is unplugged. Once power is restored it resumes operating with your saved settings, so you will not need to reprogram it.

Q7: How do I set the temperature alarm?

Ans: Hold MODE until HEAT or COOL flashes, then press MODE until ALARM flashes. Press SET to choose how many degrees above or below your setting will trigger the alarm. Setting it to 00 disables it, and settings save after 5 seconds.

Q8: How do I reset the thermostat to default settings?

Ans: Press and hold the MODE and SET buttons at the same time for about 3 seconds. This erases your programmed settings and restores the defaults: Heat mode at 77 degrees Fahrenheit and the alarm turned off.