Zoo Med Turtle Clean 30 External Canister Filter media thumbnails
Zoo Med Turtle Clean 30 External Canister Filter
Zoo Med Turtle Clean 30 External Canister Filter - Reptile Filters 2
Zoo Med Turtle Clean 30 External Canister Filter - Reptile Filters 3

Available Now!

Zoo Med Turtle Clean 30 External Canister Filter

Zoo Med SKU: TC-32 Barcode: 097612023220

$104.40

Shipping calculated at checkout

30 Gallon Turtle Canister Filter for Aquatic Turtles

Product Description

Zoo Med Turtle Clean 30 External Canister Filter is designed for aquatic turtle tanks, vivariums, turtle and tortoise pools, or aquariums up to 30 gallons (114 liters). It is rated at 160 gallons per hour with an adjustable flow control system, an easy-to-open filter head, and an included spray bar for added aeration.

Benefits

  • Sized for 30 Gallons: Designed for aquatic turtle tanks, vivariums, and turtle or tortoise pools holding up to 30 gallons.
  • 160 Gallons Per Hour: Zoo Med rates the Turtle Clean 30 at 160 gallons per hour of water flow.
  • Complete Filter Media: Includes coarse and fine sponges, ceramic media, and an activated carbon bag, ready to install.
  • Biological Ceramic Media: Beneficial bacteria colonize the ceramic media and help decompose waste held within the filter.
  • Adjustable Flow Control: An adjustable flow control system lets you tune water flow to suit your turtle's tank.
  • Spray Bar Aeration: The included spray bar provides additional aeration; alternatively, use the flow diverter.
  • Easy Maintenance: An easy-to-open filter head and removable hose-connecting device let you service the filter without disconnecting hoses.
  • Anti-Vibration Design: Calibrated anti-vibration bushings and four rubber feet are part of the canister's design and setup.
  • UL Listed: Manufactured to UL 1018 safety standards and cUL US listed, according to Zoo Med's instructions.

Specifications

Specification Details
Tank size Up to 30 gallons (114 liters)
Flow rate 160 gallons per hour
Filter media Coarse sponge, fine sponge, ceramic media, activated carbon bag
Tubes 2 tubes, 10 7/8 inches long, 1/2 inch diameter
Hoses 2 flexible hoses, 2 feet long, 5/8 inch diameter
Features Spray bar, flow diverter, removable hose-connecting device, anti-vibration bushings, rubber feet
Safety listing cUL US listed; manufactured to UL 1018 safety standards
Formerly known as Turtle Clean 511
Warranty 1 year

How to Use

Recommended Usage Chart

Detail Information
Suitable for Aquatic turtle tanks, vivariums, turtle and tortoise pools, aquariums
Placement Flat surface beside the tank, upright and not below the tank
Water for priming Dechlorinated water; canister filled completely
Startup setting Flow control devices set to MAX
Tank water level High enough to fully cover the intake strainer
Outlet GFCI-protected outlet, with a drip loop
Cleaning About once a month for one turtle

Disclaimer: Product information and usage guidelines are provided by the manufacturer. Always use products as directed and contact your vet if you have questions about your pet's health.

Usage Instructions

  • Check the Parts: Unpack the filter and verify all parts match the parts diagram to ensure nothing is missing.
  • Assemble the Intake: Attach the adapter to the intake strainer, insert it into the intake tube, and add two clips.
  • Assemble the Outlet: Fit the rubber elbow to the hard elbow unit, then attach the spray bar or flow diverter.
  • Mount to the Tank: Clean the tank wall, then attach the intake and outlet units using the clips and suction cups.
  • Load the Media: Rinse the carbon bag without opening it, insert it, then add rinsed ceramic media on top.
  • Close the Filter Head: Reattach the head with the fill cap above the ceramic side, then latch both clips until they snap.
  • Fill the Canister: Remove the fill cap, fill the canister with dechlorinated water, and lock the cap back in place.
  • Connect the Hoses: Lock the hoses onto the elbows and the hose-connecting device, with intake to IN and outlet to OUT.
  • Prime and Start: With flow controls at MAX and the intake strainer submerged, plug the filter into a GFCI outlet.
  • Let Air Clear: Some noise and air on startup is normal and should clear within a few minutes.

Additional Information

Precautions

  • Electric Shock Hazard: Water is used with this equipment; never attempt repairs yourself; return it for service or discard it.
  • If the Filter Falls In: If the appliance falls into the water, don't reach for it; unplug it first, then retrieve it.
  • Check Before Plugging In: Do not plug in the filter if there is water on parts not intended to be wet.
  • Use a Drip Loop: Arrange a drip loop and a GFCI-protected outlet so water cannot reach the plug or receptacle.
  • If the Plug Gets Wet: Don't unplug a wet plug; disconnect the fuse or circuit breaker first, then unplug and inspect.
  • Unplug Before Maintenance: Disconnect all electrical appliances, including the filter, before placing your hands in the water or servicing it.
  • Keep It Upright: Keep the filter upright on a flat surface beside the tank, never below it or on its side.
  • Lock the Fill Cap: Make sure the fill cap is locked in place; if not, the filter may not operate properly.
  • Avoid Moving Parts: Do not contact moving or hot parts, and supervise closely when the filter is used near children.
  • Intended Use Only: For indoor aquarium or vivarium use only; avoid attachments not recommended or sold by the manufacturer.

Storage Information

  • Avoid Freezing: Do not install or store the filter where it will be exposed to weather or freezing temperatures.
  • Store Extra Media: Keep any unused ceramic media in a clean, dry place so it's ready when you need it.

Shipping & Return

We offer ground, express, priority, and international delivery; see our shipping policy for details.

For return instructions or product concerns, please refer to our detailed refund policy.

Frequently Asked Questions

Q1: What size tank is the Turtle Clean 30 for?

Ans: Zoo Med designed it for aquatic turtle tanks, vivariums, turtle and tortoise pools, or aquariums up to 30 gallons (114 liters). The filter is rated at 160 gallons per hour and was formerly sold as the Turtle Clean 511 by Zoo Med.

Q2: How do I prime the filter?

Ans: Before switching on the filter, fill the canister with dechlorinated water and check that the fill cap is securely closed. Turn the flow controls all the way to MAX, and make sure the tank water reaches high enough to keep the intake strainer completely submerged.

Q3: Why won't my filter start?

Ans: Unplug the filter and check that the canister is full of water. If it is not, remove the fill cap, add more dechlorinated water, replace the cap, and plug it back in. If it still won't start, contact Zoo Med customer service.

Q4: Should I cut down the flexible tubing?

Ans: Zoo Med notes that cutting the flexible tubes shorter may help the filter prime more efficiently. First, make sure the motor head is level with, or below, your tank's water line, and never cut the tubes so short that they pull taut and obstruct flow.

Q5: Where does the carbon bag go?

Ans: The activated carbon bag goes below the ceramic media in the filter chamber. Rinse the carbon bag under running water without opening it, place it in the empty side of the canister, and add the rinsed ceramic media on top.

Q6: How often should I change the filter media?

Ans: Zoo Med recommends replacing the carbon once a month. Rinse the ceramic media monthly and change it only if it restricts water flow. Sponges can also be rinsed monthly and only need to be replaced if they cannot be cleaned or start to break down.

Q7: What does the ceramic media do?

Ans: The ceramic media provides surface area for beneficial bacteria to grow. Zoo Med says these bacteria help trap other bacteria and break down waste in the filter. Rinse it gently in lukewarm water during cleaning to avoid removing beneficial bacteria.

Q8: What if a screw nut seems to be missing?

Ans: Zoo Med explains that small plastic pieces are packed together, and a screw nut often falls inside the intake strainer during shipping. Check the strainer at the bottom of the intake tube and remove it to prevent flow restriction. Otherwise contact customer service.