Available Now!

Zoo Med Turtle Clean 50 External Canister Filter

Zoo Med SKU: TC-50 Barcode: 097612023503

$184.09

Shipping calculated at checkout

Turtle Clean 50 Slimline Canister Filter for Aquatic Turtles

Product Description

Zoo Med Turtle Clean 50 External Canister Filter is built for aquatic turtle habitats up to 50 gallons (190 liters), including turtle tanks, vivariums, box turtle pools, and TurtleTubs. Rated at 200 gallons per hour, its slimline design fits tight spaces, and a double filtering system with internal biological recirculation combines mechanical, biological, and chemical filtration. An easy priming feature is included.

Benefits

  • Up to 50 Gallons: Handles aquatic turtle habitats up to 50 gallons (190 liters), from tanks and pools to TurtleTubs.
  • 200 Gallons Per Hour: Zoo Med rates this canister at 200 gallons per hour of filtration flow in your habitat.
  • Slimline Design: A slimline canister shape designed to fit in tight spaces next to your turtle's habitat setup.
  • Three Types of Filtration: Combines mechanical, biological, and chemical filtration using sponges, bioceramic media, and activated carbon in a single canister.
  • Internal Biological Recirculation: A double filtering system with internal biological recirculation, according to Zoo Med's product details and instructions.
  • Easy Priming Feature: Helps get the filter running once the canister is full of water.
  • Spray Bar Oxygenation: The included spray bar helps increase oxygenation, or swap in the flow diverter if you prefer.
  • Media Comes Preinstalled: Activated carbon and all sponges arrive preinstalled in the canister, with bio ceramic media included.
  • UL Listed: Built to UL 1018 safety standards and cUL US listed, per Zoo Med's instruction sheet.

Specifications

Specification Details
Habitat size Up to 50 gallons (190 liters)
Flow rate 200 gallons per hour
Filtration Mechanical, biological, and chemical
Filter media Coarse pre-filter sponge, fine mechanical sponge, bio ceramic media, 2 activated carbon bags
Tubes 2 tubes, 11.75 inches long, 5/8 inch diameter
Hoses 2 flexible hoses, 4 feet long, 3/4 inch diameter
Included parts Spray bar, flow diverter, hose connecting device, 4 rubber feet, clips and suction cups
Safety listing cUL US listed; manufactured to UL 1018 safety standards
Warranty 1 year

How to Use

Recommended-Usage Chart

Detail Information
Suitable for Turtle tanks, vivariums, box turtle pools, and TurtleTubs
Placement Upright on a flat surface near the habitat, hoses unkinked
Startup Orange flow control valves at MAX; canister full of dechlorinated water
Water level Must cover the intake strainer
Power GFCI-protected outlet with a drip loop
Routine cleaning Usually once a month for one turtle
Carbon Replace once a month

Disclaimer: Product information and usage guidelines are provided by the manufacturer. Always use products as directed and consult your vet if you have any questions about your pet's well-being.

Usage Instructions

  • Check All Components: Take the filter out of the box and review the parts diagram to ensure everything is included.
  • Put Together the Intake: Attach the adapter to the intake strainer, then connect the intake tube. Push the tube further in if you need to make it shorter.
  • Build the Outlet: Mount the elbow on the second hard elbow unit, then fit the spray bar or flow diverter.
  • Add Ceramic Media: Rinse the ceramic media and pour it into the right chamber, saving any extra for later.
  • Seat the Filter Head: Line up the fill cap over the ceramic side, then press the head down and latch both clips.
  • Fill With Water: Unscrew the fill cap, fill the canister with dechlorinated water, then lock the cap.
  • Mount and Connect: Attach the intake and outlet units to the clean habitat wall and lock hoses to IN and OUT.
  • Start the Filter: Set the flow controls to MAX, confirm the intake strainer is underwater, and plug into a GFCI outlet.
  • Allow Air to Escape: Expect some startup noise; trapped air clears within a few minutes before full flow begins.

Additional Information

Precautions

  • Avoid Self Repairs: Since the filter uses water don't attempt to fix it yourself. Send it in for servicing or dispose of it if needed.
  • If It Falls Into Water: Don't reach for it; switch off the fuse or breaker supplying power, then unplug and retrieve it.
  • Inspect After Installation: Never plug the filter in if any parts that should stay dry are wet.
  • Damaged Cord or Plug: Do not run the filter with a damaged cord or plug, or after it malfunctions or is dropped.
  • Drip Loop and GFCI: Plug into a GFCI-protected outlet with a drip loop to prevent water from running down the cord.
  • Wet Plug or Receptacle: If the plug or receptacle gets wet, cut power at the fuse or breaker before unplugging.
  • Disconnect Before Servicing: Unplug all electrical appliances, including this filter, before putting your hands in the water or cleaning.
  • Keep It Upright: Never lay the filter on its side, and make sure the hoses are not kinked.
  • Lock the Fill Cap: If the fill cap is not locked in place, the filter may not operate properly.
  • Children and Moving Parts: Supervise children closely, and avoid touching moving or hot parts, such as heaters and bulbs.
  • Intended Use Only: Use indoors in an aquarium or vivarium only; do not use with attachments not recommended or sold by the manufacturer.

Storage Information

  • Protect From Freezing: Do not install or store the filter outdoors or at temperatures below freezing.
  • Keep Extra Media: Store leftover ceramic media in a clean, dry spot until needed again.

Shipping & Return

We offer ground, express, priority, and international delivery; see our shipping policy for details.

For return instructions or product concerns, please refer to our detailed refund policy.

Frequently Asked Questions

Q1: What habitat size does the Turtle Clean 50 handle?

Ans: Zoo Med rates it for turtle tanks, vivariums, box turtle pools, or TurtleTubs up to 50 gallons (190 liters). It has a 200-gallon-per-hour rating and a slimline design that fits in tight spaces beside your turtle's habitat.

Q2: What if the filter has trouble starting?

Ans: Unplug it and confirm the canister is full of water. If it is not, open the fill cap, top it off with more dechlorinated water, replace the cap, and plug it back in. Contact Zoo Med customer service if problems continue.

Q3: Is the filter media already installed?

Ans: Yes. The filter comes with the activated carbon and all sponges preinstalled in the canister. Before first use, rinse the carbon bag without opening it, rinse the ceramic media, and add the ceramic media to the canister's right chamber.

Q4: Where does the carbon bag go?

Ans: Zoo Med says the carbon bag goes below the center sponge. Place it at the bottom of the center chamber with the two chamber dividers installed, then insert the fine mechanical sponge above it with the center hole facing up.

Q5: How often should I replace the carbon, ceramic media, and sponges?

Ans: Replace the carbon once a month. Change the ceramic media only if it restricts water flow. The sponges can be rinsed monthly and only need to be replaced if they can no longer be cleaned or begin to break down, according to Zoo Med.

Q6: How often does the filter need cleaning?

Ans: Zoo Med notes that cleaning once a month is usually enough for one turtle while habitats with more animals may need more frequent cleaning. Unplug all electrical appliances first, then unlock the hose-connecting device to keep the hoses in place.

Q7: What size are the tubes and hoses?

Ans: Zoo Med lists two tubes measuring 11.75 inches long with a 5/8-inch diameter, and two hoses measuring 4 feet long with a 3/4-inch diameter. The intake tube length is adjustable by pushing it further into the intake tube adapter.